Rendering Fibre Glass Mesh 1m x 50m

Rendering Fibre Glass Mesh 1m x 50m

This is a Re-inforced Fibre Glass Rendering Mesh.

The Alkaline Resistant Render Mesh is 4mm x 4mm 157g per M2.

The mesh must be completely covered by waterproofing or levelling compound.

Application Procedure

Apply an even background coat of render approx 1mm to 1.6mm apply this waterproofing or levelling compound with a smooth edge trowel.

The render mesh should then be placed onto the waterproofing or levelling compound then lightly pressed in with a trowel to completely cover the mesh. Overlap the joints of the mesh by a minimum of 5cm.

A second coat of render can be applied if required when the first coat has hardened, generally within 12 to 24 Hours.